more floor.
2 coats of varathane water-borne polyurethane with hardener, 1 wet coat without hardener, in the dining room and living room. it started pouring rain and the temp dropped to 62f (16c) in a matter of minutes… raising the tack level of the polyurethane quite a bit…. resulting in some impurities in the last coat. being a non-hardened coat, it’ll all buff out. needs to be buffed before the layer of acrylic wax goes on in a few weeks, anyway. in another 4 hours, the floors can safely be walked on (barefoot or with socks). 4 more and i can move some of the furniture inside (on cotton pads), because i gotta go back to LA tomorrow… don’t think that leaving our sofas on the porch is the greatest of ideas.

dining room, still (very) wet:

living room, 5 minutes after the last application:

cool pocket doors between the living room and dining room:

the front bedroom just has one coat of un-hardened polyurethane, for now. not entirely happy with the outcome of the sanding, particularly the part along one wall that rebecca is giving me a hard time about
i’ll feather/blend it in better, sometime later… then put 2 more coats of poly.
the hall still needs to be stripped and blended into the front bedroom, and the back bedroom…… damn that room.

the back bedroom still has linoleum on it. it’s likely staying for a bit. i figure it’ll take roughly 20 hours to remove it, another 4 hours of sanding to level it… then stain and poly. for now, just plain don’t have the time before leaving.

soon, we’ll have to decide if the back bedroom’s floors will be done before moving everything into it… or later, after the bedrooms upstairs are done. i’m a bit torn between the two, as the linoleum is clean (save for a 1 square foot area i removed)… and it would be nice to actually use it as a bedroom. or, on the other hand, it would be nice to finish the floor and be done now.

* for today.

front bedroom:

dining room:

living room:

stained 1 coat 75/25 mix of minwax oil-based dark walnut stain and odorless mineral spirits, hand rubbed with cotton.
tomorrow i can screen sand with more mineral spirits to bring out the grain of the wood more…. then decide on a final finish:

the wood looks good in person; a bit dark in the photos. it actually came out darker than i intended, but after a screen sanding tomorrow it’ll brighten up a bit.

not the manliest of things…. but after working for 14 hours, the cast iron tub rocks. spent an hour in it, tonight. too sore/tired to get out of it…

(note the vinyl flooring… it’s coming out, 1″ hexagon tile going in… more work to do)

today has been eaten up, thus far, with arranging to have a storage container delivered before the movers arrive… and getting the city to issue a permit so it can sit on the street. need the container because we can’t move our furniture and belongings into the house due to our apartment being infested with some kinda mold i can’t pronounce, let alone spell. it’s black, and sounds scary. the furniture all needs to be cleaned in some magical voodoo-ish way (ok, hepa vacuum and some anti-mold stuff) before it’s moved in. gives me a bit more time with the floors, at least…

front bedroom, after 2 passes with 36grit, 2 passes with 60 grit, 1 pass with 80grit. still need to do the areas the large floor sander won’t reach.

dining room, after the floor sander…

living room, after the floor sander, and after 3 passes with the handheld RO sander, edges done… can finally see the detail work in the corners…

the floors are all quarter sawn old-growth douglas fir. best guess is the tree was around 200 years old when it was sent to the mill, by the look of the grain. fir is generally a softwood, but the really old trees were dense… this stuff is about as hard as oak… and went through a lot of sandpaper. driving 6d nails through it feels like trying to drive 16d nails through concrete.

the floor sander is about 85lbs, 4.5HP, and feels like tug-o-war against a drunk mule. no fun to load in/out of the volvo, either… nowhere to get a good grip, awkward, and slippery yet quite pointy in parts. lost a bit of blood on it, while trying to maneuver it into the trunk, in the rain, after ~12 hours of use.

still need to strip the armored floor (linoleum) from the rear bedroom… and strip the hallway. due to the size/shape of the hall, the big sander won’t fit. just going to strip the stain, hand scrape and sand with the handheld RO.

something in the house that’s actually in perfect condition… 1920s cast bronze, leaded glass, retrofitted to modern-ish lights most likely sometime in the 50s.

removing the lovely brown plush carpeting:

carpeting removed, showing the lovely asbestos-laden ~80 year old linoleum:

nothing says “class” like wall to wall greaze-repelling linoleum flooring… a detail shot:

luckily the original installer of the linoleum half-assed the job and didn’t bother stripping the wax off the floors… so the tar-based sticky mess didn’t… well… stick. it peeled up in 4′ wide sheets with moderate effort.

the floor is in amazingly good condition, probably because of the linoleum that’s protected it for roughly 80 years. they’ll still need refinishing to even the color out (some of the tar adhesive discolored the wood, here and there)… but overall it’s quite nice. the white-ish stuff in the photo is actually floor wax, which scrapes off easily.

rear bedroom didn’t go as well. linoleum, but this stuff is stuck. it looks as if the linoleum was placed over the wood, before the wood was ever finished. this is the result of 20 minutes of a full on assult. i think it’s the floor assulting me, though…